ROUTE SURVEY OF ROAD AND PAVEMENT DESIGN

ROUTE SURVEY OF ROAD AND PAVEMENT DESIGN (REHABILITATION/MODERNIZATION)

ABSTRACT

The research provides an overview and full explanation of the modifications that must be made to the primary access road connectivity of the Campus III Industrial Center from the federal Secretariat to the Institution’s Mass Communication Department in order to update its services and operations.

Because the institution has a commercial core, there will be a greater requirement to improve traffic flow on this access route. It is necessary to redesign and generally improve the toad. As a result of traffic development, the current road is no longer in top condition.

The research modification consequently entails an assessment of the roads’ current condition, which includes conducting side tests and surveys to determine what may be done and how best to improve traffic flow.

TABLE SUMMARY

Certification Dedication

Abstract Acknowledgement

Contents table

CHAPITRE ONE

Introduction in general

Design software

Goals and objectives

The Benefits of Road Reconnaissance Survey Route Survey

CHAPITRE TWO

Theodolite crossing the road control

The significance of theodoversing equipment utilized in traversing procedures

Angle to bearing conversion (whole area bearing)

co-ordinates of a rectangle

CHAPITRE THREE

General survey of field leveling work

Preliminary survey leveling work is required.

Aim is a technical phrase used in leveling.

The use of leveling

Leveling instrumentâ€TM Operation conditionâ€TM Road leveling

Data file reduction

A summary of profile and cross sectional leveling

Profile plot applications

Earth labor computation leveling tabulating

CHAPITRE FOUR

Identification of soil/laboratory test

Identification of soil

A soil laboratory test was conducted.

To be carried out is a test.

Soil analysis

Size analysis of sieves and particles

Goal and scope

Materials and tools

Producers of tests

Limits to consistency

Soil liquid limit

The goal and scope

Materials and tools

Procedure for testing

Index of plasticity

Plasticity-based soil classification

Importance of the research

Compaction

The goal and scope

Materials and tools

Procedure for testing

The bearing ratio of California (cbr)

The scope of the objective

Materials and tools

Procedure for testing

Borrow sub-base materials

Laboratory examination of borrowed materials

Cbr score

Mechanical analysis tabulation

CHAPITRE FIVE

Create vehicles

Highway capacity by design

Design guidelines Design period

Horizontal alignment of the primary design element

Vertical symmetry

Curvature in the vertical direction

Grade point average

Vertical and horizontal alignment coordination

Designing curves

Layers of Pavement

Pavement design information that the engineer should be aware of for design preparation

Pavement expansion

Pavement materials, pavement components, and their purposes

Road pavement design

cbr value calculation

Design of vertical and horizontal curves

Design process Pavement service life

Drainage layout

Basic drainage design policy

Drainage channels on the side of the road

Conclusion and recommendation on erosion protection