Design Of Molten Salt Cooler In Process Plan For Production Of 2-7 X 104 Tonnes/yr Of Phthalic Anhydride By Diret Abstract The general approach to any design of a process factory involve an advanced network of Chemical Engineering processes. This outfit design design was carried out to design a molten swab cooler( … Read more
ROUTE SURVEY OF ROAD AND PAVEMENT DESIGN (REHABILITATION/MODERNIZATION) ABSTRACT The research provides an overview and full explanation of the modifications that must be made to the primary access road connectivity of the Campus III Industrial Center from the federal Secretariat to the Institution’s Mass Communication Department in order to update its services … Read more
POLLUTION PROBLEMS AND AN ENGINEERING APPROACH TO THE MANAGEMENT AND CONTROL OF INDUSTRIAL EFFLUENTS ABSTRACT The impacts of effluent discharges from various point-loads on a purposefully selected receiving river, the river’s self-recovery potential, and the treatability of both the discharges and the receiving stream in a heavily industrialized community were investigated in … Read more
STRUCTURAL DETAILING OF A REINFORCED CONCRETE STRUCTURE PREFACE The structural engineer initiates the project in structural details. The architect creates architectural drawings to the scale and specifications specified by the client. The structural engineer creates the building’s structural frame and specifications such as slab, beam, column, and foundation. The structure … Read more
UTILIZATION OF STEEL SLAG FOR STABILIZATION OF A LATERITIC SOIL ABSTRACT According to the Unified Soil Classification System (USCS) and the AASHTO classification system, a lateritic soil categorized as sandy clay or (CL) and A-7-6 (5) was treated with up to 10% crushed steel slag (an industrial waste product) by dryweight of soil. … Read more
EVALUATION OF WATER QUALITY MODELLING PARAMETERS: TOWARDS THE EVOLVEMENT OF RE-AERATION COEFFICIENT FOR RIVERS IN THE NIGERIAN ENVIRONMENT ABSTRACT This research was conducted on the River Atuwara in Ota, Ogun State, Nigeria, with the goal of producing a coefficient of re-aeration model that could be applied to the River Atuwara and other … Read more
A MATHEMATICAL MODEL FOR PREDICTION OF THE STRENGTH OF SANCRETE CEMENT BLOCK Abstract Sandcrete blocks are prismatic units made from lean (sand-cement) mortar mixtures that are the most often used walling materials in Nigeria and other nations. Although the blocks are preferred over other similar walling materials such as bricks and concrete … Read more
AN ASSESSMENT OF THE IMPACT OF WORK ENVIRONMENT ON THE PRODUCTIVITY OF CONSTRUCTION SKILLED WORKERS IN IMO STATE, NIGERIA CHAPTER ONE INTRODUCTION 1.1 STUDY BACKGROUND Productivity has become the term of the day since it is widely accepted that the higher the productivity, the better. However, productivity in the building business is dismal. … Read more
CAUSES OF CONSTRUCTION PROJECT FAILURES AND ABANDONMENTS IN NIGERIA CHAPTER ONE INTRODUCTION 1.1 THE STUDY’S BACKGROUND Building and other civil engineering infrastructure development projects such as houses, churches, schools, highways, bridges, dams, tunnels, air port, sea port, and so on litter the entire Nigeria. According to Osemenan (1987), Nigeria has become the “world’s … Read more
EFFECT AND IMPLICATION OF FLUORIDE ON DRINKING WELL WATER INTRODUCTION TO CHAPTER ONE 1.1 BACKGROUND OF THE STUDY Fluoride is one of the few compounds that has been demonstrated to have a substantial impact on people via drinking water. Fluoride has good benefits on teeth at low concentrations in drinking water, but excessive … Read more